How to Sew a Wave Corset Belt with Hip Flare

Cómo coser un cinturón corsé ondulado con vuelo en la cadera

Saltar a instrucciones

Descripción general

Presentamos nuestro patrón de costura de corsé bajo el busto con cinturón de moda, diseñado para drag queens. Este patrón único y versátil te permite realzar tu figura sin esfuerzo con la incorporación de pantalones acampanados de cadera desmontables. Ya sea que busques crear una silueta atrevida con forma de reloj de arena o hacer una declaración con tu conjunto drag, este corsé es el accesorio perfecto. Fabricado con telas no elásticas, ofrece estilo y estructura, lo que lo convierte en un elemento básico esencial para el guardarropa de cada drag queen. Realza tu apariencia, abraza tu creatividad y expresa tu estilo único con este patrón excepcional.

Dificultad del patrón: Intermedio

Detalles de tallas

Este patrón está disponible en nuestros exclusivos talles de drag queen (XS-S, ML, XL-2X). Consulta nuestra guía de talles para obtener más información sobre nuestras medidas de talle.

Guía de tallas

Telas y artículos de mercería

Sugerencias de telas

Adecuado para tejidos no elásticos:

  • Cuero o polipiel
  • Vinilo
  • Algodón
  • Dril
Nociones
  • Interfaz fusible
  • Ojales para ojales de 1/4"
  • Broches de presión
  • Cuerda o cinta
  • Deshuesado de elección
  • Cinta de ribete al bies opcional

Yardas de tela

Este patrón requiere el uso de tela no elástica. A continuación, se indican las yardas necesarias para cada talla.

Ancho de la tela (44”) Tallas XS a S M-L Talla XL-2X
Caparazón 0,5 yardas 0,75 yardas 0,75 yardas
Recubrimiento 0,5 yardas 0,75 yardas 0,75 yardas
Interfaz 0,5 yardas 0,75 yardas 0,75 yardas

Para obtener información sobre la conversión de pulgadas a metros, consulte nuestra guía de conversión.

Guía de conversión de yardas

Instrucciones de costura

Guide Color Key
How to sew a underbust corset for drag queens

Fabric Pieces

After cutting your fabric, you should have two seamless corset pieces and two seamless hip flare pieces. If you're using lightweight, non-stretch fabric, you'll need to cut additional fabric for lining and interfacing using the same pattern. For sturdy materials like thick leather or vinyl, lining and interfacing may not be necessary.

Step 1 How to sew a underbust corset for drag queens

STEP 1

For lightweight, non-stretch fabrics, begin by applying fusible interfacing to the wrong side of either the shell or lining fabrics, and repeat for the hip flare pieces.

Step 2 How to sew a underbust corset for drag queens

STEP 2

Once the interfacing is fused, stack the two corset pieces together with right sides of the fabric facing each other. Sew them together using a straight stitch along one side. This creates the center front seam of the corset.

Step 3 How to sew a underbust corset for drag queens

STEP 3

After sewing, open up the corset and press down the excess fabric of the seam on the wrong side. Repeat these steps for both the shell and lining.

Step 4 How to sew a underbust corset for drag queens

STEP 4

Install plastic boning or sew-on rigilene boning underneath the pressed seams of the fabric with interfacing. Sew the seams down securely. Ensure that the boning is 1 inch shorter than the length of the center front seam. Boning is not needed for the fabric without interfacing, which could be either the shell or lining.

Step 5 How to sew a underbust corset for drag queens

STEP 5

Gather the shell and lining corset fabrics, stacking them right sides facing each other.

Step 6 How to sew a underbust corset for drag queens

STEP 6

Sew them together along the side and top edges. Flip the corset right side out and press the edges. You can trim some of the excess seam fabric for sharper edges.

Step 7 How to sew a underbust corset for drag queens

STEP 7

Determine your preferred method for hemming the open fabric at the bottom of the corset. Options include using bias tape trim or folding in the seam allowance and sewing it closed. After hemming, top stitch all around the corset.

Step 8 How to sew a underbust corset for drag queens

STEP 8

Install eyelets along the back edges of the corset. Alternatively, you can get creative and use zippers, snaps, velcro, or buckles.

Step 9 How to sew a underbust corset for drag queens

STEP 9

Gather the hip flare shell and lining and stack them right sides facing each other. Sew them together along the bottom curved edge.

Step 10 How to sew a underbust corset for drag queens

STEP 10

Flip the hip flare piece right side out and press down the edges. Trim the seam allowance for neater edges if desired.

Step 11 How to sew a underbust corset for drag queens

STEP 11

Repeat your chosen hemming method to close the open gap, then top stitch all around the hip flare. Repeat these steps for the opposite hip flare.

Step 12 How to sew a underbust corset for drag queens

STEP 12

Following the snap guides, install male and female snaps to the bottom edges of the corset and the top edges of the hip flares. Once complete you can snap on your hip flare panels and lace up your newly sewn corset!