Cómo coser un encogimiento de hombros puntiagudo
Saltar a instrucciones
Descripción general
Presentamos nuestro patrón de costura de bolero de manga larga con hombros puntiagudos, especialmente diseñado para drag queens que quieren hacer una declaración audaz con su estilo. Este patrón presenta una parte delantera y trasera sin costuras, con hombros puntiagudos distintivos que recuerdan a las formas piramidales, lo que le permite crear una silueta poderosa y llamativa. Ya sea que esté buscando realzar su personalidad drag o agregar un toque de dramatismo a su atuendo, este bolero es la elección perfecta. Se incluyen patrones de hombreras. Diseñado para brindar comodidad y flexibilidad, este patrón es adecuado para usar con telas elásticas en 4 direcciones. Realza tu conjunto drag y llama la atención con este patrón de bolero único y llamativo.
Este patrón ya está disponible para tallas de mujer (AFAB). Se vende como patrón independiente.
Dificultad del patrón: Para principiantes
Detalles de tallas
Este patrón está disponible en nuestros exclusivos talles Drag Queen, que van desde XS a 4X. También está disponible en talles AFAB para mujer, que van desde XS a XXL. Ambos tipos de talles de patrones se venden por separado. Consulta nuestra guía de talles para obtener más información sobre nuestras medidas de talles.
Telas y artículos de mercería
Adecuado para tejidos elásticos en 4 direcciones:
- Miliskin
- Spandex
- Licra
- Tejidos de punto elásticos
- Entretela termoadhesiva ultra firme (1/2 yarda)
Yardas de tela
Este patrón requiere el uso de tela elástica en cuatro direcciones. A continuación, encontrará la cantidad de yardas necesarias para cada talla.
| Tamaño | Yardas de tela (ancho de 58" a 60") | |
|---|---|---|
| Tallas de Drag Queen | Tallas AFAB para mujer | |
| XS | 0,75 yardas | 0,75 yardas |
| S | 0,75 yardas | 0,75 yardas |
| METRO | 1 yard | 0,75 yardas |
| yo | 1 yard | 0,75 yardas |
| SG | 1 yard | 0,75 yardas |
| 2X | 1 yard | 1 yard |
| 3 veces | 1 yard | -- |
| 4 veces | 1 yard | -- |
Para obtener información sobre la conversión de pulgadas a metros, consulte nuestra guía de conversión.
Instrucciones de costura
Fabric Pieces
Once your fabric is cut, you should have one seamless front piece, one seamless back piece, two long sleeves, one collar piece, and 2 sets of shoulder pads (3 pieces for each pad).
Stitches
For this project, the recommended stitches are a serger overlock stitch, a stretch stitch, or a zigzag stitch. A straight stitch may cause the threads to snap and is not advisable.
STEP 1
Cut the shoulder pads from ultra-firm fusible interfacing, or a thick sturdy type of interfacing. No seam allowance is included in the shoulder pads and is not needed.
Gather the front, back, and sleeve shoulder pad pieces, sewing them together side by side with a zigzag stitch as close to the edges as possible.
Next, fold the shoulder pad in half horizontally and secure it by sewing along the shoulder seam with a zigzag stitch.
These pads are designed to form a sturdy, triangular pyramid-like shape and should have enough structure to stand upright on their own.
STEP 2
Take the front and back pieces, with right sides of the fabrics facing each other, pin them together at the shoulder seams and sew along the shoulder seams.
STEP 3
Layout the front and back pieces right side up and gather the sleeves.
STEP 4
Align and pin the sleeves around the armholes, right side of the sleeve facing the right side of the front and back, using notches as a guide. Each sleeve curve is symmetrical, so there's no designated front or back. Serge or sew the sleeves in place and repeat for the other side.
STEP 5
Turn the garment wrong side out and sew the inner sleeve seams closed, continuing down the sides of the garment and the crotch.
STEP 6
Gather your collar, fold it horizotnally in half and sew the ends closed, right sides facing each other. Then flip the collar right side out and add a pin to the center front of the collar.
STEP 7
With the garment right side out, and the collar upside down, pin the collar around the outside of the neckline with the center pin of the collar meeting the center front. Serge or sew in place.
STEP 8
Hem the sleeves and the bottom of the front and back using a zig zag stitch or fold over twice for a rolled hem effect with a stretch stitch.
STEP 9
Insert your ultra firm shoulder pads into the upper part of the sleeve and shoulder. The pad should stay in place however you can hand stitch it along the seam to keep it in place.
