Cómo coser una bata

Descripción general

Presentamos nuestro patrón de costura de vestido de manga larga con cola y cuello, diseñado para drag queens que buscan hacer una entrada triunfal en eventos como galas nocturnas, bodas, bailes de graduación o espectáculos de fantasía. Este patrón presenta un elegante vestido de manga larga con una lujosa cola, confeccionado con telas elásticas para garantizar comodidad y estilo. La cremallera trasera del vestido se extiende por debajo de la cintura para que sea fácil de usar, y el cuello alto agrega dramatismo a tu look. Realza tu personalidad drag y crea un conjunto espectacular con este patrón, perfecto para esas ocasiones especiales en las que quieres brillar y dejar una impresión duradera.

Dificultad del patrón: Intermedio

Detalles de tallas

Este patrón está disponible en nuestros exclusivos talles Drag Queen (XS-4X). Consulta nuestra guía de talles para obtener más información sobre nuestras medidas de talle.

Guía de tallas

Telas y artículos de mercería

Sugerencias de telas

Adecuado para tejidos elásticos:

Miliskin
Spandex
Lentejuelas elásticas
Licra
Tejidos de punto elásticos
Vinilo elástico

Nociones

Cremallera de 20 a 24 pulgadas
Opcional: estabilizador desprendible para mantener la cremallera plana

Yardas de tela

Este patrón requiere el uso de tela no elástica. A continuación, se indican las yardas necesarias para cada talla.

Tamaño	Yardas Ancho de tela (58”)
XS	2,25 yardas
S	2,5 yardas
METRO	2,75 yardas
yo	3 yardas
SG	3 yardas
2X	3,25 yardas
3 veces	3,5 yardas
4 veces	3,5 yardas

Para obtener información sobre la conversión de pulgadas a metros, consulte nuestra guía de conversión.

Guía de conversión de yardas

Instrucciones de costura

How to sew a gown sewing pattern for drag queens

Fabric Pieces

After cutting your fabric, you should have following:

One seamless front top piece
One seamless front skirt A piece
One seamless front skirt B piece
Two back top pieces
Two back skirt A pieces
Two back skirt B pieces
Two sleeves
Two collar pieces

Stitches

For this project, the recommended stitches are a serger overlock stitch, a stretch stitch, or a zigzag stitch. A straight stitch may cause the threads to snap and is not advisable.

STEP 1

Sew the darts on the wrong side of the fabric for the front top, front skirt A, back top, and back skirt A pieces.

STEP 2

Sew the back top and back skirt A pieces together, right sides of the fabric facing each other, at the waist using a serger, stretch stitch, or zigzag stitch.

STEP 3

Sew the seamless front top and front skirt A pieces together, right sides of the fabric facing each other, at the waist using a serger, stretch stitch, or zigzag stitch.

STEP 4

Take the front piece and the two back pieces, with right sides facing each other, and pin them together at the shoulder seams. Sew along these seams.

STEP 5

Take your two collar pieces, stack them with right sides facing each other, and sew along the top curved edge. Flip the collar right side out and pin at the center front.

STEP 6

Lay the front and back pieces right side up and pin the collar around the neckline with the center pin matching the center front, keeping the collar upside down. Serge or sew in place.

STEP 7

Sew a 20-24 inch invisible zipper along the center back opening, starting at the collar. Ensure the right side of the zipper faces the right side of the fabric. Use a straight stitch with a zipper foot for sewing. For a flat zipper finish, you may use a tear-away stabilizer between the zipper and the fabric.

STEP 8

After attaching the zipper, fold the excess fabric at the top of the zipper vertically and hand-stitch it down to secure this fold before proceeding.

STEP 9

Next, fold over the zipper tape horizontally and pin it in place, ready for topstitching. Repeat the same steps on the opposite side. Topstitch around the zipper sides to reinforce and neatly finish the edges.

STEP 10

Sew the back skirt B pieces to the back skirt A pieces, right sides facing each other along the back knee line.

STEP 11

Once the zipper is secured to the back pieces, sew the remaining space below the zipper down to the train of the back.

STEP 12

Sew the front skirt B piece to the front skirt A piece, right sides facing each other along the back hemline.

STEP 13

Spread out the front and back pieces right side up and gather your sleeves.

STEP 14

Align and pin the sleeves around the armholes, with the right side of the sleeve facing the right side of the front and back, using notches as a guide. Serge or sew the sleeves in place and repeat for the other side.